Installing Michigan Match propeller

I was looking for an aluminium propeller with more than 17" pitch but those are quite hard to find. The propeller must be Selva Madeira compatible which basically means it must be Yamaha compatible. I found a Michigan Match 10.9" x 17.6" propeller for Nissan/Tohatsu and decided to order one.

This seems to be some older model which is not in the latest catalog, the product number is 142009.

Michigan Match 10.9 x 17.6

I quickly noticed that this propeller is not compatible with Selva Madeira stock thrust washer.
I decided to use the Yamaha thrust washer that comes with Michigan Wheels XHS hub kit 117, the one I modified a little.

There was still a problem with the compatibility, the diameter of the thrust washer was about 44 mm or (1 3/4 inches) leaving a 2 mm gap. I really hope someone could standardize the propeller fittings, it's very hard to install propellers from other brands. Of course Michigan XHS and Solas Rubex hub kits are trying to overcome these problems.

What I did is that I took magnetic tape and folded it two times to make a suitable adapter ribbon that was 1 mm thick. I used a bench vice to make it more solid, it was easy to install and after some lubrication the thrust washer installed quite nicely.

I think you can use any strong tape, maybe brass tape could be the optimum, I just had magnetic tape in stock 😏

Magnetic tape

Magnetic tape folded two times.

Custom adapter ribbon installed.

Yamaha thrust washer modded for Selva Madeira.

Michigan Match propeller 142009
ready to be installed on Selva Madeira.

Jun 7, 2018 update:

I tried to install the propeller but diameter of the outer body is too large and the propeller was touching the gear case and only barely rotating!
I'm planning to remove some coating and try again, will post an update later on.

Jun 30, 20180 update:

I used some sandpaper to make hub diameter smaller, now it's a little less than 80 mm and propeller spins freely when installed on Selva Madeira 40.

I did some tests on the water and propeller behaved quite well, still the top speed was a little slower than with Solas 11 x 17 so I'm keeping this Michigan Match propeller as a spare propeller.

14200

142009